Please can someone help me, I don't seem to be able to
view my 'Albums' from the iTunes library via my Golf's bluetooth?
It only shows me 'radio' and 'playlists' as 2 options in the bluetooth media folder?
Any suggestions would be appreciative!
Golf 2019 Mk 7.5 GTI...
My LLW Alternator that I replaced just had a semi-failure.
The Case screws that hold the body together had a strippage from the re-builder.
One of the Case screws backed out due to strippage and started to hit the Alternator fan.
A 4.5mm Nut wasn't replaced on the screw on the back, so I added 3...
I have a front sway bar for my 81caddy but want to make sure I install it correctly. Does any one have any photos or information on installation? Is there a hole missing in my control arms for it to bolt on. Again any information would be greatly appreciated.
Traded in my 2007 GTI that had a 6 CD changer.
Just realized that my 2018 GTI S does NOT have a CD player. I am living in the past, as I do NOT have a smart phone or an MP3 player (nor do I want one).
Can I use a USB flash drive and will it function (choose genres, albums, tracks and artists)...
I need help identifying this part. Several months ago, I removed a Bosch VE injector pump from my '82 Rabbit pickup and sent it to Giles for an upgrade. It's back and as I started to re-install the pump, I came across this "bracket" in among the hardware I saved. I have no idea what this is or...
Remove the cover over the lock assembly.
Remove Latch arm out of the lock
Remove the 2 Phillips screws
Remove the lock assembly, and take care of the seal.
On the back of the latch there is a Pin.
Force this pin out a wee bit to the outside.
Push the lock up, this will allow you to...
Hi looking for a Fuse/Relay diagram for my 1984 gas rabbit. I was going to install a new fuel pump relay but not sure which it is. it would also be nice to know what the other relays are. their is one off to this side as well. Cant seem to find a diagram like this online thanks
During my Current Top replacement I just snapped my rear cable, Dang it. The price jump from 50 to 70 dollars for my preferred cable was too much.
I didn't want to make one, as I am trying to keep this one OEM....
So MTM manufacturing has an unsheathed cable.....
How to sheath it....
I got tired of that Return hose weeping, or breaking, and every time that I have to take it off pray that I don't cut it off or break the radiator.
The Bend of it always bothered me since 1980.
Well I took a 1/4 90 degree brass barbed fitting and 2 more hose clamps, to change it.
My B-and A pillars look like garbage, dull not shiny.
I didn't want to use a Back to black, or paint on them so I reverted.
How did I do that.
Elbow Grease and the proper cleaners.
I started with water and wet or dry 2000 grit.
I Sanded the pillar until it...
Help!! Am repairing/resto a 67 T1 - look at the pic: someone has welded a UJ onto the steering column and then mashed two fittings and welded to steering box!!
The column does not appear to be standard as there are splines at the end (shouldn't the column have a slot??) So what column have I...
Always interesting to see what people do to their cars, make for some interesting discussion and conversation.
Took it out of winter storage on Sunday, removed OEM wheels and installed summer ones. Out for a drive along St-Lawrence river.
Bought an 84 GTI which had the heater
removed as well as anything to lighten it for
auto cross. I want to reinstall the heater
but want to know if I should use one from a
non-air or an air car. Radiator had been
changed out w an aluminum no-air
radiator. No indication of any air plumbing...
Changed a leaking water pump, and I am reminded why you should take it out as an assembly.
You can do it from the top of the car, no need to get under the car.
Soak your old bolts with PB-Blaster....Loosen with a Impact....
I needed a bolt... so I tried to take one off my spare housing using a...