Volkswagen Owners Club Forum banner
bolts
1-18 of 309 Results
Advanced
  1. Jetta New To Forum / Frequently Asked Questions
    New here but not to Jetta. Installing new transmission. Need to know exactly which bolts go where when mounting to engine. I know, I’m a idiot, I should have marked them like I did everything else. I have the Bentley manuals also. Thanks
  2. Golf MK5 / 2003-2009
    Hi guys, Having a nightmare problem with my 1.4 TSI. Replaced the timing chain, tensioner, head reconditioned, new valves ect, but for the 3rd time the exhaust camshaft stretch bolt has slackened off. Anyone have any idea why this keeps happening? I torque the new stretch bolts to 40nm plus 90...
  3. MK1 Rabbit Engine
    Howdy, I'm putting a turbo on my 81 diesel. Did they use a different head? If not, different head bolts, gaskets? Thanks...
  4. 1975 - 1984 VW Rabbit General Forum
    The bolts holding the A/C bolts in place keep falling out due to vibration from the engine. It's happened before. I tried loctite, but they came out anyway. This time the compressor hit the lower radiator hose causing it to wear through and burst. Anyone else have this problem? Is there a...
  5. 1975 - 1984 VW Rabbit General Forum
    So i started my first journey into replacing the intake manifold gasket and the exhaust manifold gasket. Ive been soaking the bolts with Kroil and PB as they are really rusty. Any tips or tricks i should be aware of? And whats the key to taking off the spring clips that are connected to the down...
  6. 1975 - 1984 VW Rabbit General Forum
    Ok so I've been driving a 1981 vw rabbit caddy for about 2 months now. The engine sat for over a year but started right up and has been fine till a few days ago. I was driving down the highway and it died in gear some how and felt like it bound up. My first thought was oil or fuel. But now I'm...
  7. 1975 - 1984 VW Rabbit General Forum
    My LLW Alternator that I replaced just had a semi-failure. The Case screws that hold the body together had a strippage from the re-builder. One of the Case screws backed out due to strippage and started to hit the Alternator fan. A 4.5mm Nut wasn't replaced on the screw on the back, so I added 3...
  8. TIGUAN OWNERS CLUB
    I have changed the water pump twice before on the Tiguan and cannot remember the torques specs for the 5 bolts to the block. Have the sequence but cannot find where I have written it down. I have found online in the audi workshop manual the spec being 9 nm (6.63 ft. lbs) which seems low to me...
  9. 1975 - 1984 VW Rabbit General Forum
    Good afternoon! So, I had someone back into the front bumper of my ‘80 Rabbit. :( One side is pushed in and the other is sticking out. It seems as if all I need to do is loosen the mounting bolts up and straighten it out by hand, but was told the ‘absorbers’ are a one-shot deal. Is that true...
  10. New Beetle Technical Forum
    could someone tell me the name of the hose , i think its a vacuum hose, that bolts to the bottom of the intake manifold top(the part that you see when you open the bonnet) its rigid plastic and runs from the left side of the engine to the right thank you
  11. 1975 - 1984 VW Rabbit General Forum
    Need help---1982 Caddy 1.6D---need block
  12. Passat New To Forum / Frequently Asked Questions
    Does anyone know where the 2 triple square bolts that holds the hard pipes to the thermostat on the 2008 2.0T I found the one 5 mm but I can not find the second one. Sent from my iPad using Tapatalk
  13. Jetta New To Forum / Frequently Asked Questions
    I can't remove the two bolts on the underside of the intake manifold. What is the proper tool. 8m triple square socket is close but no cigar? Please help
  14. Golf New To The Forum / Frequently Asked Questions
    Lost one bolt today and have heard the oil pan bolts are the same. Would it be ok to borrow one temporarily. MK4 golf gttdi asz pd130 Sent from my Moto G (4) using Tapatalk
  15. Classic VW Beetle / Bug Forum
    Im restoring a 1973 cabrio, it came to me in pieces and im trying to figure out what goes where, can anyone help with how to fix the front seat belts? I have fitted the inertia reels under the rear seat and then the slip ring directly above on the top edge, but cannot figure out where the other...
  16. Scirocco Owners Club
    Hi I'm new to VW. , just got my first , I'm looking for 15mm wheel spacers , centrical or something like that , running OEM 19 inch , need to know bolts needed etc in Australia so will need shipping, thanks
  17. Jetta / Bora MK4 / 1999-2004
    Hello, I am trying to replace the gasket and tubing on my intake manifold, I have no been able to find any you tube videos or images of how to do this for this exact engine, all the others the bolts are higher up in an easy to access spot. I have removed all the bolts except one, which is...
  18. Ask A Volkswagen TECH - Hosted by Nitroscope8
    I'm replacing the thermostat in my 2004 W8 and can't get the lower intake manifold to come off. I've removed the ten bolts, but the gasket is apparently holding it on. I've pried gently on it, but it doesn't move. When I look into the holes that the bolts were in, I see some of the gasket has...
1-18 of 309 Results
Top