Volkswagen Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 27 Results
  1. Golf MK6 / 2009 -2014
    A couple of months back the Mrs parked the car at Tesco and when she got back to it the glass had been smashed and was hanging out of the casing (although smashed to bits it was still together just hanging out by the wires). She took it to halfords for a repair and they made a right job of it -...
  2. Golf MK3 / 1993-1998
    Its not wet around the edges just the floor? Think it could be a hole in the floor? Or is there a more obvious reason im not thinking of?
  3. MK1 Rabbit Engine
    I had to remove the fan shroud to replace the Radiator fan, and it irritated me that I had to take the radiator out of the bottom sockets and wiggle it to get the shroud off the bottom hose cutout, and the switch cutout... So i started to think. Normal shroud What the shroud looked like. How...
  4. MK1 Rabbit Transmission
    Well today I was pondering to send a friend of mine the weighted Billet from Missing Linkz for a present. I bought one for my 90, along with the short shifter kit, and it rocked. Since I'm a cheap bastard (cost effective), I have come up with a home Brew version that uses no clamps, and is a...
  5. MK1 Rabbit Body
    How to remove the inner Hi-Beam on a Quad Grille It is very easy. Find the Stud that isn't a screw to adjust on the front. It is knurled. Use a Pair of channel locks to press the stud down to the nylon keeper. Now use a flat ended screw smaller than the diameter of the hole for the...
  6. 1975 - 1984 VW Rabbit General Forum
    While doing some work under the car yesterday I noticed fluid stains and gunk from the water pump. Checking the radiator I see it was low (think it may have been that way before) and bubbles. I filled up the radiator with the proper mix of radiator fluid and now the bubbles are not as bad...
  7. Ask A Volkswagen TECH - Hosted by Nitroscope8
    Hey Chis I want to try and clean my 1.8t throttle body..i already bought a new gasket...Whats the best way to do this..what should i use and how should i go about it..thanks
  8. 1975 - 1984 VW Rabbit General Forum
    How to remove the inner Hi-Beam on a Quad Grille It is very easy. Find the Stud that isn't a screw to adjust on the front. It is knurled. Use a Pair of channel locks to press the stud down to the nylon keeper. Now use a flat ended screw smaller than the diameter of the hole for the...
  9. 1975 - 1984 VW Rabbit General Forum
    I went to change out the bulbs in the instrument cluster of my 80 vert and the PC was coming apart at the edges and before I realized what was happening, I folded and tore the copper traces at both the charge light and the oil pressure light. Now neither work. I went and bought some copper...
  10. MKV Mods and Installs
    So i know that i should really get tinted professionally, but having seen tint sheets at the local wally world (as dark as 5%!!), it got me thinking: if they sell the stuff in warehouse stores, then they must expect some people to be able to do it themselves. maybe not a GOOD idea, but...
  11. MKV How-to's and DIY's
    So today i bought a can of VHT Night shade, a can of clear coat and some 2000 grit paper. I don't want to do much in terms of darkening so ill just spray them probably twice. However i have some questions and i need some exact answers :). I need to know exactly where to tape around the tail...
  12. MKV How-to's and DIY's
    So I recieved my MAF insert for the rabbit which is supposed to help with revhang etc.... but i went and took things apart only to find out that i cannot remove my maf sensor because the two screws holding it in place are like 5 stars with a pin in the middle... what tool do i need to remove the...
  13. VW Rabbit MKV Forum 2006/2007/2008/2009
    Anybody already done this or thought about it?? I'm planning on doing the .:R32 rear conversion to my 06 Rabbit. I love the way the bumper looks and the center exhaust system. Already found the parts. Got the price quoted. Got some cash saved. Just wondering if anyone else has done it and...
  14. 1975 - 1984 VW Rabbit General Forum
    I had to remove the fan shroud to replace the Radiator fan, and it irritated me that I had to take the radiator out of the bottom sockets and wiggle it to get the shroud off the bottom hose cutout, and the switch cutout... So i started to think. Normal shroud What the shroud looked like. How...
  15. Volkswagen Tiguan Forum
    Has anyone had water pouring out of the rear hatch from the edges? After a rain, I'll open the hatch and water will pit out of the hatch on the right and left hand sides??? Thanks Bill
  16. Volkswagen Tiguan Forum
    I would like to get seat covers to protect the seat when I go wade fishing so i'm looking for a set of neoprene seat covers. Unfortunetly the model is too new in the US that no one has them. Are there other VW with the same seats?
  17. Washing/Waxing/ Detailing
    hey hey... getting ready to do my first full out wash / wax... was wondering what kind of tape would work well on the trim and wouldnt leave residue after it's removed... i dont want to get white crusty wax on my black trim!! ty in advance!
1-17 of 27 Results
Top