Search Results for ‘headers’

Been searchin all over about any information i could find in regards to the 3.2 and could not find much. But now i think i know why. My 3.2 resides in a 2008 Audi TT which i have recently found out is shared between the 2 names. Can someone verify that they are in fact the same and what i...

Hello guys! I own a 2001 VW Bora (Jetta Mk4). 1.6 16V and I want to change my exhaust. I have changed my muffler, but now I want to change to full body exhaust (from headers and back.) My question is: If I change to full body exhaust will I still have the cat or not?

Hello All, I just recently purchased an 89 16v Golf GTI. I just wanted to know what parts are compatible with this car? are there parts for other cars that work on this car? I need to get my hands on an exhaust manifold for this car as I live in California and the headers that are on there...

i have a 74 super that i just pulled the motor on and i am cleaning it up and rebuilding the carbs ( dual port). The guy i bought it from says its supposedly 1710cc. My question is i want to replace the headers and exhaust. I can't find any that are specified as 1700-whatever so will it hurt the...

I have a 1641 cc engine with an Engle 100 cam, dual port heads not ported, etc. , 7.7-1 compression ratio, two Empi 34 pict. carbs, and headers. I just wondered approx. how much horseower that makes ? I would think around 80 ?

So I have a 2.5l mk6 golf and im trying to get some work done on it, i have an exhaust and cold air intake, and i was looking to see if theres any headers for it. ideas/suggestions?

Hello guys, I just purchased a 2006 rabbit and I would really want to know what the best out there performance wise for this nice car. Some mentioned camshaft, headers and intake or a tune up... anything else or whats better? Details please and thank you very much!:):drive:

so basically i just got a rabbit, and i want to put some money into it, performance wise. but i can't decide whether or not to just hold off, save it, and throw it all on a new gti when the 2014's come out, or the 2013's become cheaper. my question is, would a 08' rabbit with 2.5 L engine, and 5...

Just throwing this out there to see if anyone has tried this. Using a single wire Bosch o2 sensor #017, and inserting it in the tailpipe of the headers with a holding bracket, would it reach the necessary operating temperature of 600 degrees to enable a reading with a good DVOM? The reading I'm...

*EDIT* I had someone helping me today and unknown to me they unplugged the starter... All is well. Today I started installing my new Raceland headers for my MK1 Rabbit Convertible, I got the stock exhaust manifold, down pipe, cat, and muffler off. I then started to install my new headers. I...

What's needed to make an '08 rabbit produce 200 whp NA. Here's what I got so far (Short Runner Intake Manifold, SRI/CAI, ECU Tune, Exhaust, an headers) Please elaborate on the list as this is my long term goal for NA.

Hey guys just looking for some help for where I can get performance headers for my 07 rabbit. I've looked everywhere and can't even find eurojet. If anyone could give me a website or somewhere I can go to and also what the best brand would be that would be greatly appreciated thank you.

Hi i ordered the OBX racing sports catback exhaust for my rabbit. As i was installing, i got most of the exhaust on, up until i got to the pipe connecting to my headers and it would not fit...i have 09 rabbit...and im pretty sure those have a 4 bolt downpipe? Sorry if im using the wrong terms...

ok I have a 2.0 engine and i wana keep it simple but looking good im not going to turbo it but ive bought plenty of things like camshaft headers exhaust new fuel system short ram air intake and a few other things but the one thing i want is a intake manifold that is in the front and not over the...

Hey guys, I just my eurojet headers installed (at a shop) and it was running fine with no CEL for 2 hours. Then suddenly when driving it threw the CEL. I was wondering what the problem could be since it took over 2 hours for the CEL to come on. I've read on some forums that the headers throw a...

Hey guys, I just my eurojet headers installed (at a shop) and it was running fine with no CEL for 2 hours. Then suddenly when driving it threw the CEL. I was wondering what the problem could be since it took over 2 hours for the CEL to come on. I've read on some forums that the headers throw a...

So i beat my friends 08 v6 mustang recently ( his is auto ) as is mine but i got a little more traction off the line then he did his tires are bald. Anyway on that note just wondering what kind of wins that anyone with the SRI and the basic mods such as exhaust intake headers etc, have gotten or...

I finally getting most of the bugs worked out of my 84 rabbit convertible, and now i'm really just down to the exhaust. I'm planning on putting headers on it but i am also planning on fabricating my own 2" exhaust as opposed to spending $400 for a stainless steel 2" exhaust. So i'm wondering...

Hey this is my first VW and my first time here! got a 09 Rabbit and I was wondering if theres a diy on headers or even maybe some tips? I just ordered my eurojet headers and Ive been looking around the forum for headers install but i couldnt find anything.

Hey guys so I'm wondering if there's Ppl out there selling mods. I'm looking for some stuff like headers,testpipe, etc Let me know thanks