Should there be lights in instruments somewhere else than just the speedometer/clock -panel, I mean should there be lights in heater switches? I found one loose wire and bulb holder behind the radio and I don't figure out where they should go. Radio is aftermarket one, I thought original one...

Hi All! My first time here. I'm trying to put a 1977 Super Beetle with fuel injection, back together. There is a wire coming off the positive side of the coil with a fuse holder on it. I'm thinking it might go to the starter, but I'm not sure. Anyone out there familiar with the 77 Beetle...

Hi all, this is my first post. Thanks for letting me join. I have removed my cup holder from front dash as it was broken. Bought a new one and it says with models below year 2000, will need to remove centre plastic strip at rear of surround it slots into. Basically because it won't quite sit...

and it melted part of the holder with it. I found a replacement link and so far so good, but I'll know how it works in the morning since it controls the glow plugs. Does anyone know the replacement part number or where I can get a replacement? I was looking at a MIDI fuse holder that might work.

Can someone tell me what type of connector replaces the side marker light? Is it T10? I'm looking at possible one of these: https://www.ebay.com/itm/10PCS-T10-Socket-Clearance-Cab-Marker-Light-Holder-Replacement-Connector-Harness/131504315178?hash=item1e9e449b2a:g:sLwAAOSwkepZjCjn&vxp=mtr...

I want all my content removed!

Sold my 84 rabbit to a neighbor. Then some jackass broke into the car and tried to steal it I guess.:( With a screwdriver they destroyed the ignition switch and just about everything under the steering wheel. Turn sw,wiper sw,Ig. sw holder with bearing. Anyone have any spare parts they need...

I just bought this car and all of the cup holders are missing. The color is beige. Where can I find these at a reasonable price?:)

I have a 2011 Jetta on Guam that I have not been able to start since 01 July 15 due to a missing key. I purchased a new key direct from dealership that was programmed to my car however, I was told I need more equipment to program the car and key together. No one is willing to provide the...

Could anybody tell me what the little plastic rectangular squares between the bumpers and wheel wells are for? Touched one and it broke.

I removed the cassette holder and this was behind it. It's a light but for what? It is burned out or just doesn't work.

Remove your Instrument cluster: http://cabby-info.com/Files/DashRemoval.pdf On the back of your cluster, remove the Shroud off the main connector by pressing in the finger tabs, and carefully pry off. Carefully lift the Mylar connector off the tongue. Place one strip of electrical...

The bumper grill I ordered for my 08 rabbit just came in the mail. I tried installing it but the license plate holder is getting in the way. I am hoping there is an easy way around this. Any help is appreciated.

I suspect that the earlier frames 79-84.5 have a different Side cable connection. Where as the newer style of frame front attachment point is: And that cable is 37.5 inches from loop to loop. The older frames attachment point is: Feeds through the frame at the front The cable is attached...

Hi I am third time beetle owner all have been green picking up daisy yesterday. My claim to fame is that my first beetle after I had damaged the sump and seized the engine went on to star in the james bond film. The beetle i collected yesterday is strange in that it has no arm rest my previous...

About three months ago, I tried following Vince Waldon's DIY on timing my '82 Diesel Caddy. I didn't have the correct adapter for my timing gauge and just eye balled it. Yesterday I attempted to get the rabbit running after sitting since then and it starts up and runs (little louder than...

My mechanic has had so much trouble trying to install a set of new injectors and to get the injector o-rings down all the way into the holders that he broke off one side of one of the plastic injector holders. How does the plastic injector holder come out, and what is the procedure for getting...

I bought a new radio and installed it in my 1998 Beetle before I thought to eject my CDs from the holder in the trunk. I wondered if I took it out, cutting the wires, if I could connect a hot wire to it and make it eject? Any other way to get them out? Mel

I don't know about you guys but it's killing me that I don't have a cup holder in my 1980 diesel rabbit. What were they thinking? Anyway, anyone come up with a good way to get one in that doesn't include hanging it from the window? Also my bumper has that black strip that runs across in the...