Volkswagen Owners Club Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 500 Results
  1. General Volkswagen Discussion
    Hi, So I’m deep in trying to solve p2015 fault on a Scirroco 2.0 tfsi. I brought the car with the above problem thinking a simple intake manifold replacement would solve the problem. It hasn’t ! The intake manifold that was on the car was fine nothing wrong with it. I have now fitted a new...
  2. CC Owners Club
    I have a US spec VW CC, 2010. Recently the check engine light came on, as it does on every VW. Because of the pandemic I can't get to any dealer or a mechanic, so I decided to fix it myself. I did the OBD II check and it revealed these codes: P2015 1/4 P2015 2/4 P2015 3/4 P2015 4/4 I've tried...
  3. Golf MK3 / 1993-1998
    Hi guys, I am currently building a VR6, The motor has been rebuilt top to bottom to handle 600hp +. I want to do an AWD conversion, so a gearbox and diff recommendation will be welcomed. For an ECU I will be running the Haltech elite 750 with heaps of other goodies such as wideband IQ dash and...
  4. Ask A Volkswagen TECH - Hosted by Nitroscope8
    Hi guys, I'm building a a MK3 97 VR6, does anyone know what Injectors will fit a schimmel performance Intake, preferably 750cc + as I will be running a GTX 3576R If anyone has built a VR6 500hp + especially if done an AWD conversion, please post tips, tricks and advice, I am researching this...
  5. Volkswagen Technical Discussions - General
    What is the resistance supposed to be on the intake temp sensor circuit, I’m getting a circuit high warning Sent from my iPhone using Tapatalk
  6. Golf MK4 / 1999-2002
    Hello all, I just wanted to plug a local company. I have been using GOM1221 degreaser for a bunch of years now. It is made by BNAC Environmental in Coquitlam BC. I have left VW golf diesel intake manifolds in a pail of 25% GOM and 75% water and they come out spotless. Zero carbon left in...
  7. 1975 - 1984 VW Rabbit General Forum
    So i started my first journey into replacing the intake manifold gasket and the exhaust manifold gasket. Ive been soaking the bolts with Kroil and PB as they are really rusty. Any tips or tricks i should be aware of? And whats the key to taking off the spring clips that are connected to the down...
  8. Passat B6 Forums
    Hi All Thinking about a Passat on craiglist owner has it listed as 2006 but 2007 was the first Passat wolfsberg it has 115,000 miles very clean cond....only seen pictures.. but it has the 2.0... does this fall into the dreaded chain tensioner problem, intake valves clogging up.... owner has it...
  9. 1975 - 1984 VW Rabbit General Forum
    1981 Rabbit, 1.7L CIS Fuel is definitely getting to the 'fuel distributor' because I had a leak in the cold start valve fuel line and fuel was abundant. That is, I'm confident everything before the fuel distributor is pressurized. However, the car was not starting (this is after a full engine...
  10. Golf MK6 / 2009 -2014
    Hi everyone, first time poster, long time lurker. Just installed a new Intake Manifold and other fun/difficult hoses on my 2013 (Mk6) Golf 2.5L and wanted to throw anyone a bone before pitching the OEM plastic pieces into recycling. Happy August Long! Drive Safe! -M.
  11. VW CC Technical Forum
    Hello!. Im located in Columbus Ohio, I'm new to this forum but not to Volkswagen. My wife a a 70 autostick Beetle, i have had 3 MK4 Jettas. I just purchased a 2010 CC that needs the timing chain fix and new intake valves. I read on here where someone had their vin decoded for them. Can I get...
  12. Passat Owners Club
    2012 Passat. 2.5L. 98,000 miles. Original owner. My tale of woe begins in October. Had it in for the yearly emission/inspection test. Was told the MAP sensor failed and didn't pass inspection. The shop it was at offered to fix it for $150.00. Went home, googled (of course), MAP sensor...
1-12 of 500 Results
Top