Search Results for ‘metal’

Hi all I have just joined and run a 2008 Passat TDI Estate . One of my Key Fobs fails to remotely open or lock the doors it does however start the engine. I believe there should be a Key Barrel under one of the Door handle shrouds ...I have removed them all and under each is a blank metal...

Hi guys ... My first post here so please be gentle :) I recently got a used 2016 Volkswagen Tiguan and while moving a metal bedframe for someone today, I got two light surface scratches on the dashboard :( ... The scratches aren't deep and can only be seen in light from the right angle ...

I when to put all new brakes on my 1981 Rabbit pickup. Having trouble finding the right rear wheel cylinders. I have ordered twice now. The old ones I took off have a smoot end cap and the other ones I have got have a metal end with a groove. Theses are a bit to long and I can't get the drum on...

I am wondering where the torque converter bolt access hole is so i can replace this engine. the manual i have said there is a rubber cap covering the hole and the only cap i can find is metal cap and i cant seem to remove it. i cant get the bolt through the starter hole because its on the...

I recently bought a 2017 Passat R-line and when I drive down the road and hit a bump there's a noise that sounds like metal to metal coming from the rear end of the vehicle. Sounds as if somethings hanging and every time I hit a bump it swings up and hits something. I took it to a mechanic...

Hi, I am trying to install a wireless back up camera (AUTO-VOX M1W ) on my 2009 VW Routan. The installation says "Install the backup camera by connecting the camera red wire with reversing light and black wire with ground (metal part on the car)." I see three wires on my reverse light Blue...

I strongly suspect that my head unit unseats itself over time on the right side. That's where the micro-switch for the alarm beep is located under a metal tab. The radio seems far enough in, but it seems to become unseated after a while and the alarm beep comes usually back after forcefully...

What is the deal with the radiator mounts? I've been looking at radiators and most have the pegs, but my S1 has the feet that are held by 10mm nuts (top is held by just a metal hook). Sellers don't really note the difference.

Hi guys, I bought this mk3 gem while back and something is bothering me. Shifter seems to be loose. Should that white plastic part be inside the black metal ring?

Does anybody know of a company that makes/ made a hardtop for a 1979 Super Beetle? I would really like a metal one if possible. I know the soft top is sturdy and weatherproof but I would like a hardtop for when I am touring and have to leave the dear old thing out in city strrets overnight. I...

There's a metallic sounding popping/clicking noise when releasing my clutch pedal. Engine off. Doesn't sound like it comes from the pedal area. Worried it might be in the clutch plates. I made a video, the audio from the iPhone, and a separate audio recording with a microphone inside the...

Hi I have a 2003 Mk4 which has the usual terrible corrosion on the exterior tailgate handle. I'm just wondering if I should buy a metal original in correct colour from a scrap dealer (has just a tiny bit of corrosion) or buy a plastic replacement and respray? Cost wise it's similar, but which...

Would you recommend radweld plus for a car engine Sent from my iPhone using Tapatalk

removed oil pan, half of the chain tensioner was floating in pan. some metal too. sprocket bolt is spun and wont back out. any suggestions. ?

can you use a 200 mm clutch disc in a 210mm flywheel? how about a 190 mm clutch disc in a 200mm flywheel?

I want all my content removed!

Shame on beetle company to hold a brand name they use the cheapest plastics to make there inside room of there cars

does anyone know what the metal housing the turn signal and ignition switch sit in is called and where I could find one? mine is all mangled and needs to be replaced. thanks Nick

Have had a metal roof rack in my possession for years. Don't remember how I obtained it but it turns out it is for the vintage, flat roof, VW Rabbit body type. It is all there, not bent and finish is in fair condition. Anyone have need?

Hello, I'm replacing the DMF with a SMF and clutch on my 2003 Golf TDI. ( 255,000 ) I had no problems with it at all, I read a lot about the trouble people were having with them. Anyway I'm going to replace the rear oil seal and transmission shaft seal and when I took off the 3 bolts for the...