Volkswagen Owners Club Forum banner

mind

  1. Numerology

    General Volkswagen Discussion
    Hi guys my numbers on my car is 777. What does means this numbers in numerology?:confused:
  2. WTB OEM Gloss Black Pretorias, 18"

    Private Party 'Wanted' Classifieds
    Looking to buy some OEM Gloss Black Pretorias. They don't have to come with tires. Preferably in the general area of Texas (I'd be willing to drive to you) but willing to pay to ship if they're in good condition. Preferably <$900 for wheels only. I don't mind minor scratches or chips, as long as...
  3. Push button start!!!

    GTI MK7 / 2015 and up
    So I have a 2016 GTI, since I’ve had it I’ve had nothing but problems with the push button start. Every time I take it to the dealer I tell them about the issue and they always say, it works good for us. I’ve taken video of me trying to start and turn off the car, some of these are over a minute...
  4. Need 1.6d block

    1975 - 1984 VW Rabbit General Forum
    Need help---1982 Caddy 1.6D---need block
  5. First VW - 2014 Jetta SE

    Jetta / Bora MK6 / 2011 and up
    As the title says, I just bought this yesterday, it’s a 2014 SE with the 1.8T and a 5 speed. 32k miles, and no options. So far, I am liking the car quite a bit. Seems responsive to both steering and throttle input, although, I wouldn’t mind more power in the bottom end. For anyone...
  6. New alternator

    MK1 Rabbit Electrical
    I replaced my Bosch al113m with an al113mx. The new one did not come with clip to hold electrical connection in and old clip is too big. Should I try and make a clip or they stay in we’ll enough? And is the max alternator ok or should I have rebuilt my original one? Thanks for info. It’s an...
  7. Website recommendation for VW CC parts

    CC Owners Club
    Hello everyone. Can anyone recommend a website that sells parts for VW CC's with reasonable prices. I want to get some exhaust tips for my CC, I have looked on ebay but they are over the top prices or cheap stuff from China. I do not mind buying OEM parts as long as the price is reasonable. Peter
  8. Avoiding tire/fender rub

    1975 - 1984 VW Rabbit General Forum
    Hopefully this isnt too dumb of a question/post. I am wondering what I need to do to avoid tire rub. I just put on a set of staggered Porsche phone dials. The rears are 15x7.5 and the front are 15x6.5. As it sits now, the front and the rear both extend out past the fender. I dont mind that...
  9. temp sensors mk5 BCA

    Golf MK5 / 2003-2009
    Hi as i dont know if my sensors have been swapped with the wrong ones in the past , and as every spares shop give me screw in sensors 4 pin or as i believe 2 pin grey the correct type , Are the water temp and fan temp sensors both the same , Also the Haynes manual is not very clear but it shows...
  10. 2008 Jetta 2.0T trouble

    Jetta Owners Club
    So I was driving yesterday and I arrived at my destination then when I left the car started running really rough. Won't get up to speed, (40 max). The engine light, ecp light. I went and borrowed a scan tool and I have 6 codes. P0657,p0444,p2294,p2400,p0243, and p0030. So I'm going to sound...
  11. QUESTION Engine build

    Ask A Volkswagen TECH - Hosted by Nitroscope8
    Howzit guys So I'm building a VW 2.0 8 valve AGG Engine in a MK1. Flowing the head and porting it Putting 2.6 caravelle pistons Gonna run it with a T28 with internal waste gate . Still wondering should I go GO-TECH or DICKTATOR fuel management . Just keep in mind. This will be my daily ...
  12. Passat V6 4Motion 2002

    Passat Owners Club
    Dear Forum I recently aquired the above vehical which has done 62K miles. I am having problems with the following; 1) The computer resets at night to zero and the display is dull 2) The central locking sometimes works 3) The intermittent wiper have a mind of their own? 4) There is a...
  13. Looking for an original Mk2 Scirocco in and around Essex

    Scirocco Owners Club
    I don't mind the engine specs. The car just needs to be in good condition, some small problems are okay. Anywhere in the South of England will do, I am located in Cambridgeshire so a few hour drive is fine with me. Thanks, Rob
  14. Is there VW Rabbit meating in California?

    RABBIT OWNERS CLUB
    Hello people! I have 2009 rabbit with some exhust mods on it. But besides normal car meet, i wanted to go for either golf or Rabbit meeting near Los Angeles. Don't mind driving 2hours if there is rabbit meeting. I live near LA.
  15. Muffler Choice for 2012 Jetta TDI

    Jetta / Bora MK6 / 2011 and up
    Hi all. I just purchased a 2012 Jetta TDI and I've been making small mods to the car as far as lights (interior and exterior). I want to go further and purchase a new muffler for a more aggressive sound when I'm driving. Are there any suggestions or products that I would look into? One brand I...
  16. Ignition Key stuck in on position and can't turn off and out

    Jetta Owners Club
    The key got stuck in the ignition and I couldn't turn the car off. I could turn it to the right and it doesn't grind like it does usually but can't turn it off. It took a lot of tries before it finally came out. Then it seemed to work just fine for about 2 days and then suddenly stuck again...
  17. TPMS

    Jetta / Bora MK6 / 2011 and up
    Is it really necessary to have TPMS on 2011 JETTA?
  18. Hey I'm new! Just got my mk2 today!

    Jetta MK2 / 1984-1992
    I have a 72 bug and its out of commission. Used this as a excuse to get a Jetta hahahaha Runs good. 106k miles. Needs some work but I don't mind! Sent from my iPhone using Tapatalk
  19. Love my new jetta TDI highline

    TDI / Diesel Owners Club
    After owning my 97 Jetta diesel. For only 3 months. We traded our 2014 toyota Rav 4 in on a 2014 Jetta TDI highline blur in colour we love it full load with leather The thing is that we didn't really mind all that much the RAV4 but a all wheel drive. In a 4 cyl wasn't. That great on fuel...
  20. Parking brake cable issues

    MK1 Rabbit Mods / DIYs
    I have a 2 new parking brake cables to put in, I put in the right side no problem! . The left side though, the owner before me welded the threads near the handle, do i had to bolt cut the cable, and pull it out. I got it out, but the new cable wont go in, and keeps getting stuck about 6 inches...
Top