Volkswagen Owners Club Forum banner


  1. Need Help

    I have a 2007 vw Rabbit, im going to attempt to remove the passengers side cv axle, this axle is not bolted to the transmission, how do i remove it?
  2. Convenience Opening

    I have a 2018 SEL that I have activated the convenience opening in the system settings. I still cannot get the windows to roll down using the key FOB anyone else having this issue?
  3. Vagcom

    I have a 2009 MK5 GTI 2.0 TSI. I can’t figure out how to get my car windows to roll up and down using my key fob in vagcom. Can anyone help Sent from my iPhone using Tapatalk
  4. Jetta 2013 2.5 SE window switches and steering controls not responding

    Jetta / Bora MK6 / 2011 and up
    Hi there! I left for winter vacations and left my front right window open(in Seattle - rains like everyday and snowed this time too). The car was frozen and wet from inside and it took a lot of time for thawing. After that, my right front window was acting weird. Even after closing all the way...
  5. 77 Volkswagen Rabbit Diesel to 16v afb Mk3 Engine Swap!

    I have a 77 vw rabbit diesel and have done the body work completely from top to bottom. As far as the engine is concerned I am thinking about throwing a 2.0l 16v abf from an mk3 in there ... What would i have to do in order to make this swap successful? What parts would i need to get and what...
  6. Eos 2007 Need help please to Roll Up/Down the windows using my keyfob

    EOS Technical Forum
    Hello, i purchased recently the OBDeleven Pro to insert some tweaks to my car, however i was a bit disappointed that i was not able to find any instruction on internet how to do so, the only link i managed to find is this (3w. custompcguide...
  7. Help identifying the problem

    Golf Owners Club
    Hi all this is my first post here, I got a '89 golf about 4 weeks back from a dealer and been having a real problem with not being able to get into reverse, even the mechanic couldn't manage it and it's got worse since. Now the solution I've discovered is to get out and push the car back, once...
  8. Motor/K-frame swap?

    Jetta / Bora MK3 / 1992-1998
    Hey all so My friend who is a proud owner for a 92 mk3 jetta recently was rear-ended and they totaled out the car, so we found a 96 mk3 shell both 2.0 both stick shifts both 5 speed, so can anyone tell me if it is possible to drop the front sub frame with motor and trans assembled out of the 92...
  9. Glow Plug Broke...

    1975 - 1984 VW Rabbit General Forum
    Hey guys, I've been having a time getting my bunny to start for the last week or so. I could roll start it, and it then through out my trip it would start just fine as long as the engine didn't cool all the way down. Tested the relay and power to the glow plugs and they all seemed fine. So today...
  10. Vert Top Strap upgrade.

    MK1 Rabbit Body
    Today, while I was driving topless down the interstate @ 80mph.... The Straps that hold the boot cover on to the parcel shelf cam loose. I had cleaned the Fuzz off the velcro, and fluffed the carpet up, and it still didn't hold... So I added a snap to the strap. Using a Leather Punch I punched...
  11. Brakes not stopping

    1975 - 1984 VW Rabbit General Forum
    The brakes on my 83 Rabbit convertible have slowly been failing over last month. Pedal seems firmer than before, moves only a couple of inches down and it's taking me longer to come to a stop (definitely don't lock up, I just roll to a stop). I replaced all brakes (new rotors, drums, pads...
  12. Rear Wheel Axle - Can anyone explain what this is?

    Wheels / Tires / Brakes / Suspension
    Hi, I am a new Golf owner (Mk4, 2003, 5 door) - I have noticed on both sides of the rear wheels, a low bar (see pic) connected to the underside. I do not know what this is - and if it is normal? Can anyone advise?
  13. New to the VW club need help

    Beetle Owners Club
    Just inherited a 66' bug from my uncle who got it from him mom when she passed. It's been in Southern Cali it's whole life until just this Christmas it was towed up to Southern Utah. The bug hasn't been driven in years but has turned over and runs. My uncle pushed the bug up onto his trailed...
  14. H&R performance coilovers for VW Golf GTI at CARiD
    Only discerning drivers know what to expect from the perfect suspension solution - precise handling and superb ride comfort. H&R engineers considered all this and used all their experience to design the Street Performance Coilover Kit. Unlike traditional twin-tube shock absorbers, H&R Coil Overs...
  15. My pure white cc

    VW CC Photo Gallery
    Leave you several pics of my CC. Day by day I'm sort of freaking out about my CC. Love it.
  16. Parting out 1985 VW Jetta 4 door gas

    Private Party 'For Sale' Classifieds
    i have a 1985 MK2 Jetta that i am parting out. Gasoline/ stick shift The exterior is in pretty great shape. except no back bumper Interior is also pretty great, nice seats, back seat is perfect but has everything. Guess being parked in a carport helped The interior has everything - door...
  17. CNJ/North/South Brunswick Area

    Mid-Atlantic : Del., Md., N.J., Pa., D.C.
    I posted this in another forum: Trying to track down the owner of my old MKIV Jetta. Sold it about 5-6 years ago, but still see it in the area from time to time. Same wheels, stance, some of the same stickers, Votex front end. Could not roll my window down when I pulled next to him. Pics are...
  18. Golf MK 3 TDI Suspension/Hub Upgrade

    Golf MK3 / 1993-1998
    Hi, I'm trying to upgrade my suspension on my MK3 golf TDI but have run into trouble with the re-fitting of the brakes. I've used GTI/VR6 wishbones, ball joints, anti-roll bar & drop links. Also a non abs VR6 bearing carrier (knuckle) with my 4 stub hub pressed into it. The problem i have is...
  19. Golf MK 3 TDI Suspension/Hub Upgrade

    TDI / Diesel Owners Club
    Hi, I'm trying to upgrade my suspension on my MK3 golf TDI but have run into trouble with the re-fitting of the brakes. I've used GTI/VR6 wishbones, ball joints, anti-roll bar & drop links. Also a non abs VR6 bearing carrier (knuckle) with my 4 stub hub pressed into it. The problem i have is...
  20. How to Un-Bolt Pivot Window Latch and hinges.

    MK1 Rabbit Body
    Take the 2 T20 torx screws off. Remove the Glass from the frame. Take or Pry the Black cover off the Lock Latch on the outside. You can drive the roll pin out with a small punch and then remove the handle. Then pry the handle up and off the stud. Using a small pair of Vice-Grips on...