Hi everybody! I have a problem with headlights and I hope that someone can help me! When the low beams are on also on the right side the high beams are on! I have done a diagnosis test and there are no errors! How can I turn off the high beam and what should I do to work again normally? Thanks...
I noticed a rhythmic thumping/dribbling noise coming from the rear of my 2007 Rabbit. It happens when I’m at low speed but stops at high speed in the freeway. I’m unable to figure out where it’s coming from.
I noticed a ryhtmic thumping/dribbling noise coming from the rear of my 2007 Rabbit. It happens when I’m at low speed but stops at high speed in the freeway. I’m unable to figure out where it’s coming from.
Doing the mkv headliner 2008 rabbit. Tore one of the ribbon cables going to the passenger side visor light. Any suggestions on repair? I see others have soldered or rewired but no diy on how to make the repair! Anybody want to chime in?!
Thanks in advance!
I have noticed on my new 2019 SE the few times after we have folded the driver side mirror in, that the prior adjustment of the mirror was completely changed once we folded it back out. Anyone else have this issue? We frequently fold in the passenger side mirror, but it doesn't seem to come...
This hose and pipe is from the suction side of the compressor and connects under the dash contact me at [email protected]
I should have added that the Compressor is a Sanden and all this is on an '82 Rabbit PU
Anyone ever do the headliner in a 2007? I have a hand me down with just 30,000 miles on it but it sat outside in VA heat and most of the fabric is pretty sagging. It looks like a nasty bit of work as a DIY and it also looks like $$$$ to have it done professionally. Any thoughts? Thanks
I am wondering where the torque converter bolt access hole is so i can replace this engine. the manual i have said there is a rubber cap covering the hole and the only cap i can find is metal cap and i cant seem to remove it. i cant get the bolt through the starter hole because its on the...
Good afternoon! So, I had someone back into the front bumper of my ‘80 Rabbit. :( One side is pushed in and the other is sticking out. It seems as if all I need to do is loosen the mounting bolts up and straighten it out by hand, but was told the ‘absorbers’ are a one-shot deal. Is that true...
Is there a way to get parking asist to park at the left side of the car? At the moment, park asist only searches for a spot on the right side. Thanks in advance.
Sent from my SM-G950F using Tapatalk
Hi! I`ve got a problem during 2 last months, my jetta eats to much gas. Im already cleaning engine system.
But today I saw that oil temperature is about 65-70F (follow the copmuter). Outside is 25C. I didnt notice it before, but looks queerly. Is it ok for the engine 2.5 ? Driving style 80% isnt...