solid

Greetings; My 2008 Rabbit got a grinding noise only when clutch is applied, when released is gone. Already replace the DMF with a solid one and all of it’s components. It got a little bit silenced but still there. Any advice will be appreciated. Thanks ! Sent from my iPhone using Tapatalk

Installed new turn directional switch, worked fine after installation ,but now I get just a solid light on the dash ,and everytime I turn on the emergency flashers it will blow the fuse. I'm leaning on replacing the emergency flasher switch? Also no lights at all when trying to use turn...

My check engine light came on today (not blinking thank goodness, just solid illumination). I pulled the error code and it is P2237. The manual for the scanner doesn't have this code. when searching on the internet it seems to be an O2 sensor. Can anyone confirm it's an O2 sensor and how I can...

My 2012 Beetle 2.0T with only 62k miles is starting to show signs of clutch slippage. I'm the original owner. 1st and 2nd gear seem to be pretty solid, but going WOT in 3rd and 4th (like when passing) I'm seeing some slipping. I've been driving manuals for 30+ years. Don't ride the clutch or...

Hi All Just like to say hello, I'm new to the club as I've just been given a lovely new Golf Estate Match Bluemotion 7 speed DSG by my company. Such a solid car and lovely to drive, we came from Toyota Auris Hybrids and it's chalk and cheese. Unfortunately I'm quite unlucky with cars, was...

I can't find a solid answer on the type of engine oil I should use in my car. Hopefully some people can chime in. I live in southern Ontario and the car is warm weather driven only. 40f temps and above only. I have heard 10w40, 15w40 and 20w50. The car is stored in a heated garage during the...

My wiper got stuck in a big blob of ice. I smelled an electrical smell. The wipers still work but no intermittent. I pulled the fuses and relay that said intermittent wipers popped it open and it looked fine. What should I do next pull the whole fuse box. Oh yeah 1984 rabbit gas

I'm interested in installing a third brake light flasher. You know, flashes three times when you press the brake pedal then goes solid until you release your foot off the brake. I have two questions regarding my 2015 Jetta TDI SEL DSG - 1) why do the brake lights only work when the ignition is...

my quarter windows are solid and I would like to put a hinge kit without spending a lot of money, where can I get psrts for that,;hinge rubber,latch,etc.? (1975 beetle)

Hi all Im Newbie Need some help one my 08 Jetta back passenger side lock module stop from working i had seem a few videos on YouTube but non of them looks like this panel ..This one is more like solid cant take the metal panel off Thanks in advance

:( I do not hear the beep when I click the alarm to lock. The LED light is solid not blinking. What do I have?

I'm looking at the options for a cargo roof box for my 2011 Routan SE. I've got the factory rails. It's a black van and I'm looking for a solid black cargo box. Does anybody have a make/model that they are happy with and has done well on highway trips?

My Engine Light is on solid. Manual says Catalytic Converter. The fault code is P2187. Any help?

Any ideas why after fitting my new rear back discs and pads the car is stuck solid like the handbrakes still on! I've checked the handbrake mechanism and that works absolute fine opens and closes the lever. But after jacking the rear up and trying to turn the wheel it's still absolute solid...

Any ideas why after fitting my new rear back discs and pads the car is stuck solid like the handbrakes still on! I've checked the handbrake mechanism and that works absolute fine opens and closes the lever. But after jacking the rear up and trying to turn the wheel it's still absolute solid...

http://www.hotshotsecret.com/shop/diesel-winter-anti-gel/ Anyone have solid information or experience with this winter diesel additive? The claim makes it very attractive for use here in North Dakota. But, don't want to find out it is all ad info and not reality.

Car not going into fourth, high rpm. All speed sensors changed. Check engine light on , solid not blinking. Codes won't clear with scanner.. I'm hoping that's why the car seems to be in limp mode. Need help please. 2000 jetta GLS. Already sunk tons of money into this car..

Some Dents, Some Rust, dust and spider webs and back Brakes rusted solid. Thoughts ?? What to do first ???

Hi there Wonder if someone can help, ive an issue with the above. Ive purchased cam kit to do rollers waterpump and tensioner which is all done old belt off, cam . crank, pump all locked with correct tools at tdc, new belt put on tensioned, and rotated 2 turns on crank to check realignment...

I just reassembled my front end with new everything and installed my 1.6td high output from qualitygermanautoparts.com and go to leave the garage and my passenger front wheel will not turn. I checked everything and found that when torqued to the factory requirements the 30mm bolt caused the...