Volkswagen Owners Club Forum banner
1 - 1 of 1 Posts

Super Moderator
10,660 Posts
Discussion Starter · #1 ·
Start with a piece of Stiff wire, I use a wire Coat hanger and cut 2 lengths about 12 inches long each.

Bend a 45 degree hook on one end and the other I make a finger pull.

Insert them in to the center left and right slots on the vents, and hook the back edge of the Vent.

You will feel it catch the edge on the back.

Now Gently and Firmly pull..

You can re-enforce the Brittle edges of that by using a very thin piece of Tin (this is Stainless Steel from a LCD panel that I had to replace on a lap top...) and Jb-Weld

1 - 1 of 1 Posts