Volkswagen Owners Club Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hello, i purchased recently the OBDeleven Pro to insert some tweaks to my car, however i was a bit disappointed that i was not able to find any instruction on internet how to do so, the only link i managed to find is this (3w. custompcguide .net/vcds-alternative-obdeleven-vag-com-volkswagen-eos-cc-passat-golf-mk6-mk7) but when i follow the steps nothing happened i assume the guide was meant for newer Eos models. My request is if there is anyone with Eos 2007 model like my self had made any changes with OBD11 specially rolling the windows Up/Down with Keyfob and if it is possible to share Instructions. I would appreciate your helps. Thanks in advance


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
1,745 Posts
It's called Comfort Windows, you need to activate it -via- VCDS.

You can SEARCH for the procedure, it's not exactly the same for every
model. I activated mine on my Jetta, then, when the door latch broke
the jerk-off dealer tried to blame that on the programming... Dealers
suck, and try to blame everything on users.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
It's called Comfort Windows, you need to activate it -via- VCDS.

You can SEARCH for the procedure, it's not exactly the same for every
model. I activated mine on my Jetta, then, when the door latch broke
the jerk-off dealer tried to blame that on the programming... Dealers
suck, and try to blame everything on users.
Its too bad if i wont be able to activate this feature via OBDeleven my self, this was the main reason i bough it beside check any problem that could show up in the future ? Guess i will wait and see i am sure someone out there know how Thxx for ur answer

Sent from my SM-G930F using Tapatalk
 

·
Registered
Joined
·
1,745 Posts
That tool you have, you need the PRO version of the software.

I bet you have not even SEARCHED yahoo or google on the procedure...

I did, and it's there, so you can give it a shot...
 

·
Registered
Joined
·
7 Posts
Discussion Starter #5
That tool you have, you need the PRO version of the software.

I bet you have not even SEARCHED yahoo or google on the procedure...

I did, and it's there, so you can give it a shot...
I have the Pro Version plus there was a guide i shared the link in my first post but it was not working when i applied it to my car so i believe it was for newer Eos models, if you manage to find instructions for Eos 2007 TDI please share the link. Appreciate it


Sent from my SM-G930F using Tapatalk
 
1 - 7 of 7 Posts
Top