Volkswagen Owners Club Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have an 08 rabbit... my upper sai hose cracked and I bought the repair kit Part #: 07K198125.
My question is what to plug the sensor up near the combination valve to? I didn't have a sensor there before and I don't see any sensors on the sai pump... only the one in from of it on the intake manifold (pic 2)
 

Attachments

·
Registered
Joined
·
1 Posts
I found a sensor at the very front of the engine on my 2008 VW Rabbit, on or near the air pump. I unplugged the harness from the old sensor and untapped the wire so that the harness could reach back around to the new sensor and adaptor that came with the hose kit.
 
1 - 2 of 2 Posts
Top